Description
- 4-sided manifold
- Pressure tested and galvanized
- Max. operating pressure: 6 bar
- Max. flow temperature: 90°C
- Insulation with steel sheet casing
- Manifold, 4-sided pipe 60 x 60 mm
- Connection DN 25 (1") (female sleeve) for boiler circuits (e.g. flow and return)
- Service connection: DN 15 (1/2") top for bleeding and bottom for flushing and filling
- Insulation: 25 mm
How a hydraulic separator works:
A hydraulic separator hydraulically separates the connected circuits. This allows individual modulation of the connected primary and secondary hydraulic circuits. The water from the primary circuit does not pass into the water of the secondary circuit and vice versa.
- Lateral: Connection sleeve with female thread for boiler and utility circuits
- Top/bottom: Service sleeve for venting and draining
Technical data
| Flow rate |
up to 3 m³/h (DN 25 (1") female) · up to 4 m³/h (DN 32 (1 1/4") female) |
| Connection DN |
DN 15 (1/2") female |
| H [mm] |
250 (DN 25 (1") female) · 375 (DN 32 (1 1/4") female) |
| Type |
HWK 60 |
| Magnetite separator |
No |
| Primary connection |
internal thread |
| Temperature probe connection |
DN 15 (1/2") |
| Max. flow rate [m³/h] |
3 (DN 25 (1") female) · 4 (DN 32 (1 1/4") female) |
| Primary circle center distance [mm] |
250 (DN 25 (1") female) · 375 (DN 32 (1 1/4") female) |
| Surface protection |
primed |
| Thermal insulation |
Yes |
| Air vents |
No |
| Max. operating temperature [°C] |
90 |
| Max. operating pressure [bar] |
6 |
| Material |
steel |
| Mounting material |
No |
| Nominal primary inner diameter |
DN 25 (1") (DN 25 (1") female) · DN 32 (1 1/4") (DN 32 (1 1/4") female) |
| Drain valve |
No |
Available variants
- DN 25 (1") female — Ref. 90 007 62
- DN 32 (1 1/4") female — Ref. 90 007 63
Technical data sheets
