Description
- 4-sided tube heat exchanger VK 60 x 60
- Lower: boiler circuit sleeve
- Upper: boiler circuit connection with coupling (female/female)
- Connection: DN 15 (1/2" female) for temperature sensor
- Insulation: 25 mm
- 4-sided heat exchanger
- Pressure tested and galvanised
- Max. operating pressure: 6 bar
- Max. flow temperature: 90°C
- Insulation with steel sheet casing
How a hydraulic separator works:
A hydraulic separator ensures the hydraulic separation of connected circuits. This allows individual modulation of the connected primary and secondary hydraulic circuits. The water from the primary circuit does not mix with the water from the secondary circuit, and vice versa.
- Heat exchanger in VK 60 x 60 pipe
- Upper: connection nipple for boiler circuit with coupling (female/female)
- DN15 (½" female) sleeve for temperature sensor
- Max. operating pressure: 6 bar
- Max. flow temperature: 90°C
- Insulation (25 mm) with steel sheet casing (0.55 mm)
Technical data
| Suitable for |
HV and HVI manifolds (DN 25 (1") female (flow & return)) · HV 70 manifolds (DN 32 (1 1/4") female (flow & return)) |
| Flow rate |
up to 3 m³/h (DN 25 (1") female (flow & return)) · up to 3 m³/h (DN 32 (1 1/4") female (flow & return)) |
| Type |
HW 60/125 |
| Magnetite separator |
No |
| Primary connection |
internal thread |
| Temperature sensor connection |
DN 15 (1/2") |
| Max. flow rate [m³/h] |
3 |
| Primary circuit centre distance [mm] |
250 |
| Secondary circuit centre distance [mm] |
125 |
| Surface protection |
primed |
| Thermal insulation |
Yes |
| Deaerators |
No |
| Max. operating temperature [°C] |
90 |
| Max. operating pressure [bar] |
6 |
| Material |
steel |
| Mounting material |
No |
| Primary nominal inner diameter |
DN 25 (1") (DN 25 (1") female (flow & return)) · DN 32 (1 1/4") (DN 32 (1 1/4") female (flow & return)) |
| Drain valve |
No |
Available variants
- DN 25 (1") female (flow & return) — item no. 90 007 64
- DN 32 (1 1/4") female (flow & return) — item no. 90 007 65
Datasheets
