Bouteille de découplage DN 25 (1") jusqu'à 1600 l/h

Hydraulic manifold PAW DN 25 (1") – up to 1600 l/h

CHF 350.70

Tax included

Select an option to add this to your cart.

Template : Standard

Brass
EPP insulation included
Up to 1600 l/h
With guided flow and return
For mounting under a single DN 25 (1") hydraulic module
Can also be mounted under a DN 25 (1") manifold using the support plate (Order No: 90 002 47), or separately. For separate mounting ("in-line") on a DN 25 (1") flange, it is recommended to use 2 additional connection kits (Order No: 90 010 01).
Insulation according to EnEV: EPP half-shells
Dimensions including insulation (W x H): 330 x 128 mm
Center distance: 125 mm

Consumer side (on top): DN 25 (1") flange for DN 40 (1 1/2") nut
Boiler side (on bottom): DN 40 (1 1/2") male or DN 25 (1") female (with fitting) flat gasket,
Laterally: 2 x DN 10 (3/4") female closed with plugs

Manufacturer's reference	344203
With magnetite separator	No
Primary connection [V]	internal thread
Temperature sensor connection	DN 15 (1/2")
max. Flow rate [m³/h]	1.6
Primary circuit center distance [mm]	125
Secondary circuit center distance [mm]	125
Width [mm]	330
Height [mm]	128
With thermal insulation	Yes
With deaerators	No
Max. operating temperature [°C]	110
Max. operating pressure [bar]	5
Material	brass
With mounting material	No
Secondary connection	flange
Primary nominal internal diameter	DN 25 (1")
With drain valve	No
Secondary nominal internal diameter	DN 25 (1")