Features
• Flush and through-hole mounting
• Partially suitable for stand-off mounting
• Simple anchor check thanks to marking on the head
• Expansion clip: the threaded cone is pulled into the expansion clip and locks. The hexagon drive offers very high force transfer during screwing
• Area of application: metal constructions, brackets, railings, cable trays, ladders, stairs, machinery, facades, gates, timber constructions, concrete B 15 and dense natural stone, uncracked concrete C20/25 to C50/60
• Application: post bases, metal constructions, railings, brackets, ladders, stairs, gates, etc.
• Galvanized: for indoor and outdoor applications not directly exposed to weathering, but does not replace stainless steel
• Long thread allows for stand-off mounting and variable usable lengths
• Diameters 8 to 16 mm also for reduced embedment depths, e.g. in case of low loads or rebar conflict
• Marking on the head for clear identification of the setting depth, allowing subsequent verification of installation
• Before hammering, the hex nut must be brought to the optimal installation position (the striking pin protrudes approx. 2 to 3 mm from the hex nut)
Packaged and sold per full box (quantity indicated in the configuration).
Available variants
- SKU 94 065 29: Ø12/50 mm · Box of 20 pieces — 47.60 CHF
- SKU 94 102 30: Ø8/10 mm · Box of 50 pieces — 42.75 CHF
- SKU 94 102 32: Ø8/50 mm · Box of 50 pieces — 62.30 CHF
- SKU 94 102 33: Ø8/100 mm · Box of 20 pieces — 33.35 CHF
- SKU 94 102 34: Ø10/10 mm · Box of 50 pieces — 54.45 CHF
- SKU 94 102 35: Ø10/50 mm · Box of 20 pieces — 29.75 CHF
- SKU 94 102 36: Ø12/10 mm · Box of 20 pieces — 33.05 CHF
Data sheets
